Before beginning turf installation, you must carefully consider the landscaping layout of your property. Drainage is one of the most important factors to consider. A professional landscaping contractor must evaluate the drainage system in your yard to make sure it will adequately service your turf. In some cases, this may mean modifying your existing landscaping design. A professional landscaping contractor should also remove all debris so that the turf will not fall down easily. Additionally, they must remove all weeds and other plant matter that will cause the turf to shift during the installation process.
To lay turf, make sure you measure the size and shape of the area. Make sure you have sufficient space to accommodate the turf, and that you are aware of all obstacles that may interfere with your installation. Once you know the dimensions of the area, you must cut the turf according to the layout. Be sure to make big relief cuts in order to cover the obstructions. Similarly, when working around a flat surface, fold back sections of the turf to align the seams.
For turf installations over concrete, use a rubber shock pad. Although this is not strictly necessary, it can provide additional comfort for people. Lay the panels flat on the ground before adhering to the base. Make sure they do not overlap. Apply base adhesive around the perimeter and seams. Once the panels are secured, you can start installing the artificial turf. If you have installed the rubber base on concrete, it should be similar to laying the turf on a rubber base.
If you need to cut turf around irregular objects, measure carefully. Make sure to measure all the dimensions of the area so that you do not miss any. Then, make relief cuts on the edges of the obstacles to avoid any mistakes. Make sure to leave an inch allowance on both sides of the turf and the edge of the hardscape. Once you’ve marked the area with turf, you can begin cutting. When you’ve finished cutting the turf, make sure to use a chalk line to mark the edges of the roll.
When installing turf on concrete, be sure to cut around drains, planter beds, and other obstacles. After you’ve cut around the obstacles, apply infill (also known as rubber pellets) to the turf surface. If you plan to use artificial turf in your home, you may want to consider adding a coat of sand to protect it from heat. Ensure the infill is layered properly and will cover 60 square feet.
Next, install the turf. Once you’ve prepared the area, cut the turf to fit. Make sure you use a utility knife or a turf cutting tool. You may also want to use a nail gun to secure the turf to the hardscape. Make sure to space the nails evenly, but don’t drive them too deep or too close together. If you do drive the nails in too deep, you may end up with dips or divots.
Find us on Google for more! Catch on some of our great reads!
Recent Comments